How To Install WPC Floor
Dec 03, 2020
Deixe um recado
Sweep the ground: clean up the garbage on the ground, including no corners, the ground is not clean, and there will be a feeling of "sandy" under the floor in the future.
Leveling: The level error of the floor can not exceed 2mm, if it exceeds, find a way to level it. If the floor is uneven, the foot feel of the floor will of course not be good.
Laying the bottom layer (optional): After the floor is cleaned, put the silent layer on first, so as to prevent noise during the use of the floor.
Cross-laying: The next step is to lay the floor. When laying, place a short one next to a long one, so that the cross-laying floor will bite and not be easy to loosen. After the floor is put together, it must be tapped with tools.
Pry and fasten: After installing in a certain area, it is best to fix the installed floor with a scrap plate, and pry in with a tool to make the floor completely bite.
Choosing layering strips: After laying the floor, the layering strips are installed. Generally, the high and low pressure strips should be used for the floor higher than the ground, and the flat strips should be used for the floor as flat as the ground.
Bead: When installing the bead, be sure to bite the bead with the floor, and tighten the screws, otherwise the bead and the floor will be easily separated in the future.
The WPC floor market has a huge prospect and the domestic market has not yet been developed. Nowadays, under the strict environmental protection, many small workshop-style laminate flooring factories have ceased production, and WPC flooring is simple to produce. The decorative layer and core layer can be purchased and processed into finished products by themselves. This is a good opportunity for the transformation of laminate flooring factories. WPC floor is completely environmentally friendly, which is also a blessing to the common people. Its 100% recyclable feature will become a major selling point in the secondary decoration market, and the market potential is unlimited.
